Guide to Unbrick and Flash Stock ROM Samsung Note 8 With ODIN.

Unbrick Samsung Note8. You can solve the bricked or boot loop problem on Samsung note 8 by following this guide. a boot loop is when your smartphone does not boot normally and just stops on the logo display, then reboot again. So, you can not use the phone to make calls or send messages. In addition to boot loop problems, the following guidelines can also be used to cope with unresponsive phones. the following guidelines will explain how to perform flash stock ROM using ODIN software. To flash according to the guide in this article, you must use a Windows OS-based computer. because the ODIN software only runs on Windows computers only.

You must download ODIN and stock ROM or firmware first. Also, prepare a computer or laptop that is free of viruses. This is done so that the flashing process can run smoothly without constrained virus factor. Usually, after you successfully flashing, your phone will return fresh as when first bought. Ok, if you are ready to flash. Please read further instructions below. Please read carefully, all the risks involved in doing flash is your own responsibility. We only provide general guidelines that are often used to flash the Stock ROM Samsung Galaxy Note 8. make sure all requirements meet the requirements of this guide.

I need to remind you before you proceed to follow this guide. flash stock ROM or firmware will delete all data stored in the mobile phone. you should backup all data to a more secure place, if still possible to do it.

Ok, let's start to flash Samsung Note8.

Prerequisite.

1. a computer or laptop with Windows operating system.
2. Download ODIN, Odin is used to assisting the flash process by sending stock ROM from pc to phone.
3. Samsung Galaxy Note8 Firmware. You need to select the model according to your country of residence.
• Europe SM-N950X Here
• Korean SM-N950N - Here
• China 2 SIM SM-N9500 - Here
• USA SM-N950U - Here
• USA SM-N950U1 - Here
• Global SM-N950F - Here
• Canada SM-N950W - Here

Instruction.

1. Extract ROM in a folder that you can easily find
2. Boot your Galaxy Note 8 into Download mode.
• How to boot Samsung Galaxy Note8 into download mode?
• Press and hold Volume Down + Power Button + Bixby Button for a while till you see a warning screen. 
• Once you see the warning screen, press the Volume Up Button and your phone will go into Download Mode. 
3. Open ODIN software.
4. Flash Stock ROM with ODIN
5. Wipe data and cache from the recovery
6. Done

Video Guide.

How to Download OTA Firmware and Update Samsung Galaxy S8, S8+, S9, S9+ or Note 8.

How to Download OTA Firmware Samsung Galaxy S8, S8+, S9, S9+ or Note 8.

Download OTA Firmware Samsung. This is a very easy step to download OTA firmware for Samsung Galaxy S8, S8+, S9, S9+ or Note 8. We do not provide direct download files to the intended firmware. This guide will explain how to download the firmware. We provide the guides very easy to understand. with just a few clicks, you can already do the downloaded firmware you expect. The firmware that you have downloaded can be used for OTA update of your Samsung smartphone device.

If your Samsung mobile phone currently has out of date, while vendor updates are no longer available. using the following guidelines is a great way to update the firmware. There are actually various ways to update the Samsung firmware. First, you can update using OTA (over the air). Second, update firmware using a third-party application called Samsung Kies.

Why should you update via OTA? If updates are available, we recommend you update via OTA. this is the reason why you should update via OTA.

• You need to download a smaller firmware than if you need a manual update.
• OTA update will give you much more stable because the firmware is downloaded and installed from the official smartphone vendors.
• It's easier because we only require data packets and a stable Internet connection only. We don't any additional device (Laptop or PC).

  

  Download OTA firmware 

How to update your Samsung phone via OTA Update.

1. Power on phone.
2. Then, Go to menu "Settings > About device > Software update > check now"
3. If any recent updates are found, then the Samsung device will automatically download the update package containing the firmware file for Install.
4. Once the download is complete, a message will appear to install the update package, just hit the "Install" option and the device will automatically reboot/restart to start the upgrade process.
5. This process will automatically run, may your phone has several times rebooted. Don't panic it's normal, just wait for the process complete.

The above explanation is if OTA update is still available for your Samsung device. then, what if the OTA update is no longer available? You may use the alternative method to update your Samsung Galaxy S8, S8+, S9, S9+ or Note 8 via OTA firmware.

How to Update Samsung Galaxy S8, S8+, S9, S9+ or Note 8 Via OTA Firmware?

Download OTA Firmware.

1. Download OTA firmware from the following site Here 
2. Scroll down the page and select your model number and the current version.
3. Now, you can see an available update for your Samsung device.
4. Just download the OTA firmware and save it on the computer.



download OTA firmware Samsung S8, S9

5. Finish.

How to Update OTA Firmware.

1. Once the OTA firmware already downloaded, now put the "update.zip" file on the SD Card root.
2. Boot the phone into recovery mode by turning the phone off.
3. How to enter Samsung Galaxy S8, S8+, S9, S9+ into recovery mode?
4. Once it's completely Power off, press and holds the Bixby, Volume Up, and Power buttons. 
5. When it turns back on, let go of the Power button but keep the others held down. Once a blue screen appears, let go of all the buttons.
6. Using the volume buttons, navigate to: "
• Apply update from SD card if you have an SD card in your phone.
• Apply update from ADB if you have the file on your computer.
7. If you have an SD card, press the Power button to confirm and wait for it to finish, 
8. Once the process finish, reboot the phone.
9. Now, your phone already updated and use the latest firmware version.

ODIN3 v3.13.1 Download - Update, Flash Firmware, and Root Android-based phones.

ODIN3 Download. Do you need ODIN3 software at this time? if so, you can download the tool in this post. ODIN3 is commonly used to update and flash the firmware on Android-based phones. In addition, you can also root on Android devices. Generally, ODIN3 is used to flash Samsung cell phone and overwrite the system files. Various operating systems can be installed into Samsung smartphone using this ODIN3 tool. This means you can first install the OS before your phone manufacturer has released an update. So that your phone gets the latest Android operating system update.

Besides ODIN3 can be used for a firmware update, you can also root your Samsung phone using this tool. Once your phone has been rooted, you can do some important things. For example; You can remove unused bloatware, save battery power, install a custom ROM, etc.

download ODIN3

ODIN3 makes your Samsung phone rootable and has a permanent root access by installing a custom kernel. Everything you do with ODIN3 certainly poses a lot of risks. Because installing a new Android operating system or installing a kernel can cause your Samsung phone to be a brick.

In order for ODIN3 to run properly in a Windows-based computer operating system environment, you must run it as an Administrator. Editing INI files according to your system specifications can also help ODIN3 work best.

ODIN3 is a freeware license, this software run only on Windows 32-bit and 64-bit operating system. Here you can download ODIN3 v3.13.1

DOWNLOAD ODIN3

How to Flash Stock ROM Samsung Galaxy J2 Prime - SM-G532G Run Android Marshmallow 6.01.

Flash Samsung Galaxy J2 Prime Stock ROM. in this post we will show how to flash the firmware on Samsung J2 Prime. As well as a device controlled by the firmware, Android Samsung J2 can also be flashed. Flashing is the same as reinstalling the operating system. When you flash your device, all data stored on the phone will be erased. We strongly recommend backing up all data to a safer place before committing a flash stock ROM.

There are several reasons why we should flash the Android system. Here are some reasons why you flash your Android phone. First, your Android phone run slowed down. When your Android phone has been running for several years, the phone's performance will slow down by itself. This is because of the phone stores temporary files that hamper the performance of Android system. Not just slows down the performance, even your mobile can frequently be crashed. Generally, the initial step you can do is performing a hard reset or master reset, but, if this does not work. flashing is the right step to overcome the problem.

The second problem is your phone get a boot loop. When your phone is getting a boot loop, the mobile phone only shows the Android logo then reboot again. This incident happened repeatedly. So your phone cannot enter the main menu. In this case, you can also overcome by flashing a new ROM or firmware.

To flash on Samsung Galaxy J2 Prime, we need ODIN flash tool and Stock Firmware. All the tools needed for flash ROM in this guide you can download in a prerequisite section below

Ok, now let's start this guide to Flash Stock ROM Samsung Galaxy J2 Prime - SM-G532G

Prerequisite.

1. ODIN
2. Samsung J2 Prime Firmware 

Instruction how to flash Stock ROM Samsung J2 Prime.